(as of Apr 28,2023 08:39:34 UTC – Details)
2022 UPGRADED 2 IN 1 WIRELESS MICROPHONE HEADSET
✔Cardioid Microphone to Clear voice.
✔Plug and play.No need pair.
✔165 feet(50 meter) signal receiving effective distance.
✔ UHF Wireless Tech: FCC certified independent high-frequency band, no cross-frequency interference when multiple units are used together.
✔Upgraded from 300 to 450 mAh, work 6-7 hours.
✔3 red indicators represent 100% left battery, 2 for 66% left, 1 for 33% left.
✔15 Sets Working Simultaneously: Support 15 sets of microphones working simultaneously in different frequency bands without interfering with each other.
✔ Use Directly: Voice amplifier, Power amplifier, Stage Speaker, Mixer.
✔ Support Jack: 6.35 mm MIC jack.
✘ NOT Support Jack: AUX/Line in jack.
✘ NOT Support Devices: Bluetooth speaker, iMac, MacBook.
✘ NOT Included: Product NO speaker, NO amplifier, NO auditory function.
165 Feet Receiving Range
UHF Anti-interference.Plug and play.No need pair.165 feet(50 meter) signal receiving effective distance.
Cardioid Microphone to Clear voice
Microphone has the most sensitivity at the front and is least sensitive at the back. This isolates it from unwanted ambient sound and gives much more resistance to feedback than omnidirectional microphones.
400 mAh Battery Capacity
6 hours working time. Fully charging time only takes 2.5 hours, USB cord has two charge port which can be used for charging the transmitter and receiver at the same time
2 in 1 Design
Choose the headset mode or handheld mode according to your needs
Transmitter *1Receiver *1Headband *12 in 1 USB charging cable *1User manual *1
What if it doesn’t work or has NO Sound?
1. Firstly turn on the power and observe the battery indicators to confirm whether they have electricity, charge them if low battery.
2. Then check if your device is within the range of devices supported by the microphone: AUX/Line in jack, Bluetooth speaker, Laptop computer and MacBook are not supported.
3. Freely contact if any questions!
What if it can’t Pair?
If the blue lights continue flashing, means that the pairing was not successful, please re-pair them with following steps:
1. Turn off the transmitter and receiver;
2. Turn on the transmitter and long press key “volume+” “volume-“at the same time for 5 seconds, the indicator light starts flashing blue, waiting for pairing;
3. Turn on the receiver, wait for auto pairing about 5 seconds;
4. Indicator light of the transmitter and receiver stop flashing after a successful pairing.
How to use multiple wireless microphone headsets at the same time?
When multiple sets of WXM05 are used in the same place at the same time, the frequency point needs to be cut: Press and hold volume “-” button for 5 seconds to switch the frequency randomly. It supports up to 15 sets of WXM05.
【Professional Wireless Microphone Headset】Upgraded Bietrun wireless microphone is FCC certified, which can work with Mixer, Pa system speaker and amplifier etc without delay or radiation. UHF independent frequency bands can resist jamming and howling ,clearer the sound quality.
【How to Use】Turn on the transmitter and receiver, the blue light will flash for approximately 2s. Indicator light stops flashing after a successful match, then you can use it, no further operation. Long press volume “-” button of the transmitter until the blue light flash 3 times to change channels, which can avoid interference.
【6 Hours Working Time】Built in newest upgraded 450 mah rechargeable lithium-ion batteries, transmitter and receiver can be charged simultaneously with the dual usb v2.0 cable. Fully charge is only 2.5 hours, working time upgraded to 6 hours.
【What If No Sound】Turn on transmitter and long press “+” key and “-” simultaneously until the indicator light starts flashing (blue). Then turn on receiver, wait for auto pairing about 5s. Indicator light stops flashing after a successful pairing. Please feel free to contact us if you have any questions.